Envu Premise Imidacloprid 30.5% SC Insecticide Termite Control (Deemak Control ) – 250 ML| Anti Termite Chemical For Pre And Post-Construction

1,175.00

Practical Application Tips

  1. Use the right equipment: For soil treatment, use sprayers, watering cans, or rodding equipment.

  2. Follow IS 6313 guidelines: Make trenches, treat backfill properly, and ensure all critical zones (foundation, slab edges, etc.) are covered.

  3. Measure accurately: Use a precise measuring device to mix 2.1 ml in 1 L of water.

  4. Protect yourself: Wear gloves, mask, safety goggles, and other PPE while mixing and applying.

  5. Prevent runoff: Avoid applying when rain is expected, or take measures so the solution doesn’t enter drains/water.

  6. Record applications: Note where you applied, how much, and when — helpful for inspections or future re-treatment.

  7. Re-inspect: Even after treatment, periodically check for termite activity to ensure the barrier is working.


If you like, I can check latest guidelines (2025) in India for using Premise safely and legally — do you want me to do that?

Availability: 10 in stock

Envu Premise Imidacloprid 30.5% SC is a systemic insecticide widely used for termite control and certain household pests. Below is a clear, practical guide for its use.


Primary Uses

1. Termite Control (Most Common Use)

  • Preventive and curative treatment against subterranean termites in buildings.
  • Used for pre-construction and post-construction anti-termite treatments.

2. Soil Insect Control

  • Used to create a treated zone in soil to stop termite entry.

3. Household/Structural Pests

  • Sometimes used for control of wood-boring insects.

⚙️ How to Use (General Guidelines)

(Always follow the label instructions for your region.)

🔹 Pre-Construction Termite Treatment

  • Dilution: Usually 7.5 ml per liter of water (varies by label).
  • Apply to:
    • Foundation trenches
    • Flooring underlayers
    • Pillar pits
  • Creates a chemical barrier before construction begins.

🔹 Post-Construction Termite Treatment

  • Dilution: Often 5–7.5 ml per liter of water.
  • Apply by:
    • Drilling holes along walls (approx. 45–60 cm apart)
    • Injecting solution into holes to reach soil
    • Treating soil around the building perimeter

🔹 Wood Treatment

  • Dilute as per label and apply by brushing or spraying on infested/weak wood surfaces.

🛡️ Mode of Action

  • Imidacloprid acts by disrupting nerve transmission in insects.
  • Slow-acting: termites contact/ingest it and spread it within the colony.

⚠️ Safety Precautions

  • Wear gloves, mask, long-sleeve clothing.
  • Do not inhale spray or allow skin contact.
  • Keep away from children, pets, food, and water sources.
  • Dispose of empty containers safely.

📌 Important Notes

  • Exact dosage can differ by country and manufacturer label.
  • Always read the official label before use (mandatory for insecticides).

If you want, I can give:
✅ Exact dilution rates for India
✅ Step-by-step application guide
✅ Dosage calculator based on area (sq ft / sq m)

Just tell me your requirement.

Reviews

There are no reviews yet.

Be the first to review “Envu Premise Imidacloprid 30.5% SC Insecticide Termite Control (Deemak Control ) – 250 ML| Anti Termite Chemical For Pre And Post-Construction”

Your email address will not be published. Required fields are marked *

Scroll to Top